BIANCO CIRESUOLA “C/D”
ORIGIN
BLOCK SIZES
COLOUR UNIFORMITY
AVAILABILITY
PREVAILING USE
POLISHING TREATMENT | ITALY
NORMAL DIMENSIONS
GOOD
LIMITED
INTERIOR AND EXTERIOR
VERY GOOD |
OTHER SURFACE TREATMENTS POSSIBLE GENERAL COMMENTS :
TYPICAL CARRARA MARBLE, EVERYWHERE ALL OVER THE WORLD KNOWN. WHEN NOT POLISHED IS SUITABLE ALSO FOR BIG EXTERNAL JOBS. THE BEST RESULT IS GIVEN WITH A ROUGH COARSE FINISHING OR AT LEAST AN HONED SURFACE FINISHING. A MOCK-UP, PRIOR SELECTION AND A CONSTANT PROCESS CONTROL ARE RECOMMENDED CHEAP BAD IMITATIONS ARE ALWAYS ON THE MARKET. A SPECIAL CARE REGARDING THE SETTING IS WARMLY SUGGESTED.
| EXAMPLES OF TEST RESULTS : | | | | COMPRESSIVE STRENGTH | 1319 Kg./cm.² | 1350 Kg./cm.² | | DITTO AFTER GELIVITY | 1381 Kg./cm.² | 1392 Kg./cm.² | | WATER ABSORPTION | 0,19 % | 0,21 % | | ULTIMATE TENSIL STRENGTH | 194 Kg./cm.² | 199 Kg./cm.² | | IMPACT TEST-MIN. FALL HEIGHT | 98,8 cm. | 99 cm. | | THERMAL COEFF. EXPANSION | 0,0098 mm./m. °C | 0,0100 mm./m. °C | | ABRASION COEFFICIENT | 2,32 mm. | 2,58 mm. | | BULK DENSITY | 2789 Kg./m.³ | 2795 Kg./m.³ | | ELASTICITY MODULE | 757000 Kg./cm.² | 757600 Kg./cm.² | | KNOOP MICROHARDNESS | ————— | ————— | | FLEXURAL STRENGTH | ————— | ————— | | POROSITY | ————— | ————— |
|
